Adding a Netgear EXT 6200 range extender to your network.
This can be implemented as an extender or Access Point (AP). Realistically if you can run a cable nearby and place the EXT 6200 somewhere near where you want to serve the WIFI signal you should. That's what this is about. Run an Ethernet cable as close as you can to the area where you want to serve with the Access Point. Plug in an Ethernet cable to the device. Then configure. Alright, that seems sort of simple. Anyone can do it. But no, the problem comes with the Netgear firmware. It demands you connect to the IP address of the AP or you connect to their www.wifiext.net address. If you connect in this fashion it opens a bunch of problems. First, how do you get the IP address of…